3/17/2024 0 Comments Windows 11 1440p wallpaper![]() ![]() (The screen resolution will automatically revert if you take no action. Once the resolution changes, you will be asked if you would like to “Keep these display settings?” Select Revert. In the Display resolution row, select the dropdown and choose any screen resolution that differs from the display’s current resolution. Select Start > Settings > System > Display, and look at the section that shows your displays. You can resolve this issue by temporarily changing the screen resolution of the external display. ![]() When the screen resolution of the built-in display is larger than the external, then the wallpaper on the external display might appear to be too big and will be cut off on the right and bottom sides. When the screen resolution of the built-in display is smaller than the external, then the wallpaper on the external display might appear to be too small and doesn't fill the whole screen. This problem might occur on Windows 10 or Windows 11 if the screen resolution of the built-in display differs from the screen resolution of the external display. Cable quality: does not affect this problem.On a Windows 10 or Windows 11 device with a built-in display, when you connect an external monitor with a USB-C, DisplayPort, or HDMI connection, the wallpaper on the external monitor might not correctly fill the screen. Vertical monitor incompatibility: I considered this idea, but even in landscape the S2721DGF tends to duplicate the M32Q's wallpaper. I've tried some tricks to persuade Windows to re-number the monitors, none of them worked. Making the M32Q the "1" screen means BIOS shows up on the vertical screen, making the S2721DGF the "1" screen means my actual main screen is numbered "2". Swap GPU inputs: the 3070 Ti and 4070 Ti are interesting in that the BIOS and Windows pick different inputs to be numbered Screen "1". Rolling back to 10 is not an option at the moment. Windows 10 vs 11: bug hasn't always happened even on 11, only in the past few months. Input Auto Select to disabled does not help. Unfortunately, there is no way to disable this "feature" - I have been into the factory service menu as well, there is nothing relevant there that I can see. reaching the lock screen) while the monitor is still transitioning to power saving mode. This seems like it may cause the problem on reboot as the rebooting process is fast enough that display is restored (ie. S2721DGF power saving mode: the S2721DGF has a notorious "quirk" where under some circumstances it very quickly goes into power saving mode upon detecting no signal. The RDNA3 card was slightly better in that it would never display half a wallpaper, but it would still duplicate wallpaper frequently. I can only think of a few culprits but they don't lead me closer to a solution.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |